IntelliSnap Backup Copy Operation Fails

Article ID: 56877

Article Type: Troubleshooting

Last Modified:

An IntelliSnap backup copy operation fails for the hardware array.

Symptoms

An IntelliSnap backup copy operation fails for the hardware array.

Causes

An IntelliSnap backup copy operation fails when you have an ext3, an ext4, or an XFS LVM volume for the hardware array.

Resolution

If you use Red Hat 7.x or CentOS 7.x for the backup copy proxy, perform the following operations:

  1. Disable and stop lvm2-lvmetad. On the command line, type the following commands: systemctl disable lvm2-lvmetad systemctl stop lvm2-lvmetad
  2. Disable the lvmetad parameter in the LVM config file. Edit the /etc/lvm/lvm.conf file, and add the following line to the file: use_lvmetad = 0
1 Commvault Way, Tinton Falls, NJ 07724 Sitemap | Legal Notices | Trademarks | Privacy Policy
Copyright © Commvault | All Rights Reserved.